VMAC – Vehicle Mounted Air Compressors
Toll Free: 1-800-738-8622
Fax: 1-250-740-3201
35
Part 5: Finishing the Installation
5.1 Before Starting the Engine Checklist
Make sure that the following have been completed:
□ Check the coolant.
□ Check the compressor oil level.
□ Do a final inspection to make sure that everything has been
connected and tightened.
□ Perform a final belt alignment check.
□ Check all wiring for security and protection.
5.2 After Starting the Engine Checklist
Make sure that the following have been completed:
□ Road test the truck for approximately 14 miles (20 km)
□ Watch the underhood operation to make sure that belts rotate
properly and nothing is rubbing or contacting hot parts.
□ Check all components once the engine is turned off and the
system has cooled
□ Check the coolant after the engine reaches operating
temperature.
□ Check the compressor oil level after the engine has been shut
down and the oil level has had time to stabilize.
To Next Page
Loading...
