4140
VX4 User manual V1.0VX4 User manual V1.0
ENGLISH
CHARGING PROCESS
ATTENTION:
Your device requires regular charging. Proceed as follows:
• Charge the e-scooter only with the charger supplied in the
package with the part number: FY1505462000 / FY137546200
(EU market).
• Charge the e-scooter only at a temperature between 5° C - 40° C
(41° F - 104° F).
• Fully charge the li-ion battery before initial operation and do
not interrupt the charging process. Also do not switch on or
operate your device during the charging process.
• Make sure that the charger plugs and the charging socket are
dry before charging and that there is no dirt or dust in or on
them.
• Connect the charger to the power socket via the power plug.
• Connect the charging plug to the charging socket on your
e-scooter.
• During the charging process, the LED control lamp on the
charger lights up red.
• Once the li-ion battery of the e-scooter is charged, the LED
indicator light on the charger will turn green and you can
remove the charger.
WARNING:
• The lithium ion battery may only be charged under supervision
and not overnight.
• The li-ion battery must not be charged when your device or the
device or the charging cable are wet or damp.
• Only use the original charger included in the scope of delivery
to charge the li-ion battery.
• Never charge the li-ion battery near flammable materials,
liquids, heat sources or fire.
• Keep the li-ion battery away from children and animals.
• If your li-ion battery is damaged, leaking electrolytes may cause
a risk of poisoning or chemical burns. Avoid inhaling the esca-
ping vapors! Avoid skin contact! In case of accidental skin
contact, rinse the affected area thoroughly with water and
consult a doctor.
• If your li-ion battery catches fire, never extinguish it with water!
Use sand or a CO² fire extinguisher as an extinguishing agent.
• Do not make any modifications to your li-ion battery. Never
modify, repair or disassemble the li-ion battery.
SAFETY INSTRUCTIONS
LITHIUM ION BATTERY
To Next Page
Loading...
