4948
VX4 User manual V1.0VX4 User manual V1.0
ENGLISH
PERSONALIZED PARAMETER SETTINGS
Passwort enable
Here you can enter the password set in point 2. Password Modify
and then confirm it with OK (basic password 1234) You will now be
asked: „Password enable“.
NO – No password will be requested when the e-scooter
is switched on
YES – The e-scooter can be switched on only by entering the set
password
Passwort modify
First, the existing password must be confirmed (default setting 1234).
Afterwards you will be prompted to „Password Modify“.
Now you can set your own personal password and then confirm it
by pressing the setting button (hold it down for three seconds).
Your newly created password will now be requested during com
missioning.
RECOVER DEFAULT SETTING
Recovery default settings
NO = Default setting
YES = You can delete a possible error code, which only occurs
accidentally
SYSTEM SETTING
The minimum voltage
The minimum voltage can be set here. The default setting is
42.0 V. This way, your battery is optimally protected and you
achieve the specified ranges.
DISPLAY SETTINGS DISPLAY SETTINGS
To Next Page
Loading...
