Call Transfer 29
Screened Transfer
To conduct the transfer, while connected to an outside line:
1. Press the station button where the call is to be transferred
(if programmed on your telephone), or press TRANS and dial
the station number. The called extension signals according
to the intercom signal switch position.
2. When that extension answers, announce the transfer.
3. Hang up to complete the transfer.
To answer the Screened Transfer:
Your intercom will be signaling according to the intercom signal
switch position.
1. Answer the intercom and receive the transfer notice.
2. Press the OUTSIDE LINE, or the flashing LOOP button on hold.
Transfer Search
When attempting to locate a party:
1. Press a station DSS button to signal the station,
-or-
Press TRANS and dial the desired station.
2. If the station is unavailable, press another station DSS button
to enter a new station number
-or-
Press TRANS + TRANS and dial the station number.
3. When the station answers, hang up to complete transfer.
If the Direct Transfer feature is enabled, the
screened transfer will go directly to the
handset. You do not have to press a LINE or
LOOP button to answer.
To Next Page
Loading...
