Flexible Button Programming 47
Flexible Button Programming
To program a flexible button (to use feature codes):
1. Press SPEED + SPEED.
2. Press the button to be programmed (must be programmed
in database as a flexible button).
3. Dial the desired code. A confirmation tone will sound. (Refer
to the “Default Numbering Plan” on page 98, and the feature’s
description for any additional digits to enter).
4. Press the ON/OFF button.
To program a flexible button (to use speed bin dialing):
1. Press SPEED + SPEED.
2. Press the button to be programmed (must be programmed
in database as a flexible button).
3. Press SPEED.
4. Dial the speed bin number. A confirmation tone will sound.
5. Press the ON/OFF button.
To erase a flexible button:
1. Press SPEED + SPEED.
2. Press the flexible button to be erased.
3. Press FLASH, a confirmation tone will sound.
4. Press the ON/OFF button.
To check flexible button programming:
1. Lift the handset.
2. Press SPEED.
3. Dial [7] + [#].
4. Then dial [2] to select the KEYBTN option.
5. Press the desired flexible button(s) to display programming
for the button(s) on the LCD.
6. When finished, replace the handset.
To Next Page
