62 Off-Hook Voice Over (OHVO)
Off-Hook Voice Over (OHVO)
While off-hook on a call (CO or Intercom), this feature allows you to
receive a voice announcement through the handset receiver
without interrupting the existing call. You may then respond to the
calling party using CAMP ON procedures to talk to the calling party
or use Silent Text Messaging to respond to the calling party via LCD
Displays.
The calling station is placed in a one-time DND mode upon
initiating the voice-over. One-Time DND cannot be toggled during
the OHVO call. The station receiving the OHVO call must be off-
hook and in the “H” mode.
To place an Off-hook Voice Over call:
When an OHVO station calls a busy OHVO station and a busy tone
is received, the calling OHVO station must:
Press preprogrammed OHVO button [628] or use Soft Key
OHVO to initiate OHVO announcement, the following occurs:
The HOLD button LED flashes at called OHVO station.
The OHVO receiving station receives a one-beep
warning tone. The station receiving the OHVO call must
be off-hook and in H or P mode, then the calling OHVO
party may begin the voice announcement to the called
OHVO party. The called OHVO station’s existing
conversation is uninterrupted and the voice over
announcement does not drown out the existing
conversation. If the receiving station is call forwarded,
use [5#] to override forwarding.
The calling OHVO station is not connected or able to
hear the called station’s conversation (connection only
allows calling station to transmit to the called station).
OR
To Next Page
Loading...
