Speakerphone 79
Speakerphone
1. Press ON/OFF button to ON; an intercom dial tone will sound.
2. Press the DSS key of the desired party or press an available
OUTSIDE LINE button and dial the number. The
speakerphone will be activated.
3. Press the ON/OFF button to end the call.
Speed Dial
A keyset user can associate up to 20 frequently dialed numbers as
Station Speed Numbers (9000-9019). Telephone numbers can be up
to 24 digits including pauses, flash commands, pulse-to-tone
switchover, and non-display characters. A pause is automatically
inserted after a flash.
To use speed dial:
1. If an outside line was not specified in programming, one can
be selected now or the system will assign the line.
2. Press SPEED and dial the speed bin location,
-or-
Press the preprogrammed speed bin button,
-or-
Use the Soft Key’s SPD option and then dial a speed bin
location when in an idle condition.
To store speed dial numbers:
1. Press SPEED.
2. Press an OUTSIDE LINE button or the POOL button.
-or-
Select an outside line by pressing the SPEED button again.
3. Dial the speed bin location.
To Next Page
Loading...
