46 Executive Override
Executive Override
Executive Override allows stations designated as “Executive” the
ability to override and “barge in” on other keysets engaged in CO
Line conversations. A change in volume may occur on the CO Line
or intercom call after the barge-in occurs.
If you call a busy station:
1. Press the preprogrammed EXECUTIVE OVERRIDE button
(625). The Executive station is bridged onto the CO line
conversation in progress at the called station. An optional
warning tone is presented to all parties prior to cut-thru.
2. Replace the Executive station handset to terminate override.
Flash
When connected to an outside line:
Press FLASH to disconnect the outside line and reseize an
outside line dial tone.
Flash Key on Intercom
When connected to a page zone or another internal party:
Press FLASH to disconnect page or intercom call. An
intercom dial tone will sound.
Use of this feature when the executive override warning
tone is disabled may be a violation of Federal, State or
Local Laws, and an invasion of privacy. Check applicable
laws in your area before using this feature.
To Next Page
Loading...
