Headset Mode 49
The LED will light steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button.
-or-
Use the Soft Key’s HEADSET option when in an idle condition.
The LED will extinguish.
SINGLE LINE TELEPHONE
Not applicable
While Headset mode is active, the ON/OFF button
activates the headset and disables speakerphone
and intercom call announce operation at your
station.
To install the headset, see the Installation Manual.
Station must be programmed in database
programming for headset operation before the
flexible button can be programmed.
To Next Page
Loading...
