Vogt MD Series User Manual

Warranty
Warranty
• DAMAGES THAT MAY ARISE FROM FAILURE TO READ AND UNDERSTAND THIS MANUAL ARE NOT COVERED BY
WARRANTY.
• During the warranty period, the user CANNOT DISASSEMBLE OR INTERVENE THE EQUIPMENT OR ANY PART OF IT,
without an express authorization from VOGT S.A.
• Our Technical Service is the only one authorized to intervene in equipment within the warranty period.
• If the pump does not work properly, DO NOT disassemble it, look for the fault in the installation. All VOGT equipment has
been satisfactorily tested at the factory.
• The details of the pumping equipment warranty, such as conditions of validity, equipment identification and terms of
coverage, are specified and detailed in a warranty certificate that is delivered with the equipment at the time it is shipped.
36

Vogt MD Series Specifications

General

Type	Multi-Stage Centrifugal Pump
Power	Electric
Materials	Cast Iron, 316 Stainless Steel
Material	Cast Iron / 316 Stainless Steel
Inlet Size	DN32 to DN100
Outlet Size	DN 25 to DN 80
Capacity	Up to 200 m³/h
Head	Up to 300 m
Operating Temperature	-10°C to +120°C