33
• Do not operate the device in environments where
there are high levels of dust, ammable gases,
vapours or solvents. There is a danger of re and
explosion!
• Never use the product in a vehicle.
c) Handling and use
• Also observe the safety and operating instructions of
any other devices that are connected to this product.
• The product must not be operated when the battery
compartment cover is opened or missing.
• Never pull out a mains plug by pulling on its cable
when disconnecting it from the front socket of the
product. Always pull the plug out of the front socket
by gripping the area provided for this purpose on its
sides.
• Never overload the product. Observe the connected
load in the chapter “Technical data”.
• Do not connect several measuring devices with each
other.
• Do not operate while it is covered! At higher con-
nected loads, the product becomes warm, which can
lead to overheating and potentially a re if covered!
• Only voltage-free, when the plug is unplugged!
To Next Page
Loading...
