VOLTCRAFT 1000BASIC DE - F) Displaying Energy Costs and Forecast; Resetting the Data and Restarting Recording

41
To reset the energy quantity data and the predictions, hold the
“W” button (1) pressed for 5 seconds. Furthermore, the energy
quantity, the internal 24-hour timer and the internal energy meter
are reset for the calculation of the prediction.
The data are saved if you disconnect it from the mains
socket. The data can then be read easily.
Always keep in mind to reset the data when performing a
new measurement (e.g. with a new consumer).
f) Displaying energy costs and forecast; resetting
the data and restarting recording
Use the “$” button (3) to toggle the following displayed information:
The display shows Value
"AKTUELL"
(or "CURRENT")
Energy costs since the start of
recording
"FORECAST"
and "MON."
Forecast for energy costs per month
"FORECAST"
and "YEAR"
Forecast for energy costs per year
To reset the energy quantity data and the predictions, hold the
“W” button (1) pressed for 5 seconds. Furthermore, the energy
quantity, the internal 24-hour timer and the internal energy meter
are reset for the calculation of the prediction.