VOLTCRAFT 1000BASIC DE - D) Toggling the Language; E) Showing Energy Consumption, Energy Quantity and Prediction; Resetting Data and Re-Starting Recording

40
The setup mode is automatically completed each time you
do not press a key for about 1 minute. The entered value is
then applied.
d) Toggling the language
Keep the “$” button (3) pressed for 5 seconds to toggle between
the display “AKTUELL” and “CURRENT”.
e) Showing energy consumption, energy quantity
and prediction; resetting data and re-starting
recording
Use the “W” button (1) to toggle the following displayed information:
The display shows Value
"CURRENT" (or
"AKTUELL") and "W"
Current power input of the con-
nected consumer in
W (watts)
"CURRENT" (or
"AKTUELL") and "kWh"
Current energy quantity since start
of the recordings in kWh (kilowatt
hours)
"FORECAST" and
"MON. kWh"
Prediction of the energy quantity per
month in kWh (kilowatt hours)
"FORECAST" and
"YEAR kWh"
Prediction of the energy quantity per
year in kWh (kilowatt hours)