Safety instructions
We cannot accept any liability for damage to pro-
perty or physical injury caused by improper use or
failure to observe the safety instructions. The war-
ranty will become void in such cases.
• This device is constructed and tested to fulfill DIN 57 411/ Type
1/VDE 0411 Type 1 protection guidelines for electronic gauges,
IEC 1010-1 respectively, and has left the factory in technically fla-
wless condition. To maintain this condition and guarantee a safe
operation, the user must observe the safety instructions and war-
nings ("Caution” and "Note"!) contained in these operation
instructions. The following symbols should be noted:
= read the operating instructions before use
• Gauges and devices do not belong in children’s hands
• Regulations for accident prevention in commercial facilities to the
of the association of the commercial professional co-operative
societies for electrical systems and devices should be observed.
• In schools, educational facilities, hobby shops and workshops,
trained staff are responsible to supervise the use of measurement
instruments
• The following safety rules must be observed when working on
motor vehicle or measuring battery voltage under load:
a) A carbon dioxide fire extinguisher must be easily and perma-
nently available.
b) Steel wool, grease rags, solvents, gasoline, or fuels may only
be stored in designated places and containers. Make sure to
observe the rules for fire protection.
20
To Next Page
Loading...
Need help?
General
