any circumstances. If the lead battery tester is nevertheless opened
or modified, the warranty claim expires. Use a clean, lint-free, static-
free and dry cleaning cloth for cleaning the device.
Caution!
Do not use any carbon-containing cleaning agent,
gasoline, alcohols or similar for cleaning. This will
affect the casing of the gauge. In addition, the fumes
are noxious and explosive. Also do not use any
sharp tools, screwdrivers, metal brushes or similar
for cleaning.
Technical data and measurement tolerances
Technical data
Display: : 3 digit LED display up to 999, 14 mm
resolution
Test current : approx. 100 A ± 5 % at 13.2 V
Voltage measurement : approx. 7.5 to max. approx. 25 VDC
range (direct voltage)
Running voltage range : approx. 7.5 to max. approx. 16 VDC
Charge (test) time : 10s average
Red LED less than : 9.1 VDC
Yellow LED from : 9.1 to 10.7 VDC
Green LED : 10.8 VDC
Overcharging switch : at approx. 17 VDC
Measuring exactitude : approx. 1 s
Operating temperature : 0° C to +55° C
Storage temperature : -20° C to +70° C
Relative humidity : max. 80%, non-condensing
Mass : approx. 1.3 kg
Dimensions (L X W X H) : approx. 285 x 107 x 75 mm
(without wires)
28
To Next Page
Loading...
Need help?
General
