Why are my connected consumer devices not working with VOLTCRAFT Portable Generator?
If your connected consumer devices aren't working, verify their technical specifications. Also, ensure that the voltage is correctly set and the polarity is correct.
What does it mean when the “CC” LED is lit on my VOLTCRAFT Portable Generator?
The “CC” LED indicates that the preset current has been exceeded. To resolve this, check the power consumption of your device and increase the current limitation on your power unit, if possible.
What to do if the output current is limited to 5 A on my VOLTCRAFT Portable Generator?
If the output current is limited to 5 A, even with higher current settings, it's because the front connection is limited. For higher currents, connect your device to the rear main output.
What to do if the “REAR CONTROL” display is lit on my VOLTCRAFT Portable Generator?
If the “REAR CONTROL” display is lit, the device cannot be operated via the rotary controls because remote control operation is active. To fix this, put the rear “MODE” slider into the “Normal” position.
What does the “C.V.” display indicate on my VOLTCRAFT Portable Generator?
The “C.V.” display indicates that the power unit is working normally, and the output is providing the constant voltage set.
How to troubleshoot VOLTCRAFT Portable Generator that cannot be switched on?
Check the mains voltage and the mains fuse in the device or the line circuit breaker.
What does it mean if the “O P PFF” display is lit on my VOLTCRAFT Portable Generator?
If the “O P PFF” display is lit, the DC output was switched off through the remote control output. Release the connection between contacts 4 and 5 to switch the output on again.
Why can't I operate my VOLTCRAFT HPS-11530 via the rotary controls?
If the “REAR CONTROL” display is lit, it means that remote control operation is active. To resolve this, put the rear “MODE” slider into the “Normal” position.
What to do if the “CC” LED is lit on my VOLTCRAFT HPS-11530?
If the “CC” LED is lit, it indicates that the preset current was exceeded. In this case, check the power consumption of your consumer and increase the current limitation on your power unit if needed.
Why is the output current limited to 5A on my VOLTCRAFT HPS-11530 Laboratory Equipment?
If the output current is limited to 5 A even though the current settings are higher, it is because the front connection is limited to no more than 5 A. For higher currents, connect the consumer to the rear main output.
General| Brand | VOLTCRAFT |
|---|---|
| Model | HPS-11530 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
