What to do if the “CC“ indicator is lit on VOLTCRAFT Laboratory Equipment?
If the “CC“ indicator is lit, it means the preset current was exceeded. You should check the power consumption of your device and increase the current limitation on your power unit, if possible.
Why is the “OT” indicator lit on my VOLTCRAFT VSP 2206?
The “OT” indicator illuminates when the power unit is overloaded and overheated. To resolve this, leave the device on and allow it to cool down without any load.
What to do if connected devices don't work with VOLTCRAFT VSP 2206 Laboratory Equipment?
If connected devices aren't working, verify their technical data. Also, ensure the voltage is set correctly and the polarity is correct.
How to troubleshoot VOLTCRAFT Laboratory Equipment that will not switch on?
If the power unit won't switch on, check the mains voltage. You may also want to check the mains fuse in the device or the line circuit breaker.
What does the “CV” indicator mean on VOLTCRAFT Laboratory Equipment?
The “CV” indicator means the power unit is working normally, providing the constant voltage set.
General| Brand | VOLTCRAFT |
|---|---|
| Model | VSP 2206 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
