To Next PageTo Next PageWhy is my VOLTCRAFT VC-5081 multimeter showing incorrect readings?
Incorrect readings on your VOLTCRAFT Measuring Instruments multimeter might occur if the display wasn't zeroed before measurement. Ensure you perform a zero adjustment, especially for resistance measurements. Also, check if the 'Vrms/Vp-p' button is pressed, as this could affect the readings.
What to do if there is no change of the measured value on VOLTCRAFT VC-5081?
If the measured value isn't changing on your VOLTCRAFT Measuring Instruments, verify that you've selected the correct measuring sockets and the appropriate measuring function (AC/DC).
Why is my VOLTCRAFT VC-5081 multimeter not working?
If your VOLTCRAFT Measuring Instruments multimeter isn't working, first check if the power indicator is on. Then, determine if the batteries are depleted. Specifically, check the condition of the 9 V battery and the fuse.
What to do if no measurement using the V/mA socket is possible in VOLTCRAFT VC-5081 Measuring Instruments?
If you can't get a reading using the V/mA socket on your VOLTCRAFT Measuring Instruments, the fuse might be defective. Check the fuse F 0.5 A/500 V and replace it if necessary.
How to fix no measurement using the 10 A socket on VOLTCRAFT VC-5081?
If you're unable to measure using the 10 A socket on your VOLTCRAFT Measuring Instruments, the fuse is likely the issue. Inspect the F 10 A/500 V fuse and replace it if it's defective.
Why is resistance measurement not possible with my VOLTCRAFT VC-5081?
If you're unable to measure resistance with your VOLTCRAFT Measuring Instruments, the batteries may be exhausted. Check the condition of both micro (AAA) batteries and the fuse.
General| Product Type | Digital Multimeter |
|---|---|
| Category | Measuring Instruments |
| Model | VC-5081 |
| Display | LCD |
| DC Voltage Range | 0.1 mV to 1000 V |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Measuring Category | CAT III 600 V |
| Power Supply | 9 V battery |
| Calibration | Factory calibrated |
| Weight | 400 g |
| DC Current Range | 0.1 µA to 10 A |
| AC Current Range | 0.1 µA to 10 A |
| Functions | Data hold |
| Temperature Range | -20 °C to 1000 °C |
| Safety Standards | IEC 61010-1 |
Guide for measuring DC and AC voltage.
Steps to measure electrical resistance using the multimeter.
Instructions for measuring direct current up to 10 A and 250 mA.
