EasyManua.ls Logo

VOLTCRAFT VC-337 - User Manual

VOLTCRAFT VC-337
128 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bedienungsanleitung
VC-337 Stromzange AC/DC
Best.-Nr. 2106542 Seite 2 - 32
Operating Instructions
VC-337 current clamp AC/DC
Item No. 2106542 Page 33 - 62
Notice d’emploi
Pince ampèremétrique CA/CC VC-337
N° de commande 2106542 Page 63 - 94
Gebruiksaanwijzing
VC-337 stroomtang AC/DC
Bestelnr. 2106542 Pagina 95 - 124

Table of Contents

Questions and Answers

  • C
    Christopher MarshallAug 10, 2025
    What to do if there is no measured value change on my VOLTCRAFT Measuring Instruments?
    • H
      Hunter SmithAug 10, 2025
      If your VOLTCRAFT Measuring Instruments multimeter shows no measured value change, it might be due to several reasons. First, verify that you've selected the correct measurement mode (AC/DC) by checking the display and changing the mode if needed. Next, ensure the measuring leads are properly plugged into the measuring sockets. Lastly, check if the hold function is active (indicated by “H” on the display) and, if so, disable it by pressing the “HOLD” key.
  • J
    Jennifer EnglishAug 20, 2025
    Why does my VOLTCRAFT Measuring Instruments multimeter automatically power off with three beeps?
    • S
      Sabrina HahnAug 20, 2025
      If your VOLTCRAFT Measuring Instruments multimeter automatically powers off accompanied by three beeps, it's likely due to low battery. To resolve this, replace the batteries, as the undervoltage power-off feature is enabled to prevent inaccurate readings.
  • J
    Jordan HughesAug 30, 2025
    What to do if my VOLTCRAFT VC-337 displays “ErrE”?
    • M
      Mario GarzaAug 30, 2025
      If your VOLTCRAFT Measuring Instruments displays “ErrE”, it indicates an internal system error. To attempt to fix this, power the device off and then turn it back on.

VOLTCRAFT VC-337 Specifications

General IconGeneral
TypeDigital Multimeter
Measuring Range DC Current0.1 µA to 10 A
Measuring Range AC Current0.1 µA to 10 A
Power Supply9 V battery
Basic Accuracy±0.5%
Measuring CategoryCAT III 600 V
Measuring Range DC Voltage0.1 mV - 600 V
Frequency Measurement10 MHz
FunctionsContinuity Test, Diode Test
Safety StandardsIEC 61010-1
Weight350 g

Related product manuals