C
Christopher MarshallAug 10, 2025
What to do if there is no measured value change on my VOLTCRAFT Measuring Instruments?
- HHunter SmithAug 10, 2025
If your VOLTCRAFT Measuring Instruments multimeter shows no measured value change, it might be due to several reasons. First, verify that you've selected the correct measurement mode (AC/DC) by checking the display and changing the mode if needed. Next, ensure the measuring leads are properly plugged into the measuring sockets. Lastly, check if the hold function is active (indicated by “H” on the display) and, if so, disable it by pressing the “HOLD” key.