Declaration of Conformity for Recreational Craft Propulsion Engines with the exhaust
emission requirements of Directive 94/25/EC as amended by 2003/44/EC
Modules used for exhaust emission assessment ....... B + C
Other Community Directives applied ........................... EMC 89/336/EEC
Engine manufacturer:
AB Volvo Penta
Gropegårdsgatan
405 08 Göteborg
Sweden
PL-103/08, issue 01
This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the engine manufacturer that
the engine(s) will meet the requirements of above mentioned directives when installed in a recreational craft, in accordance with the engine
manufacturer’s supplied instructions and that this (these) engine(s) must not be put into service until the recreational craft into which it is
(they are) to be installed has been declared in conformity with the relevant provisions of the above mentioned Directives.
Name and function: Tom Tveitan Product Liability Signature and title:
(identification of the person empowered to sign on behalf (or an equivalent marking)
of the engine manufacturer or his authorised representative)
Date and place of issue: (yr/month/day) 2008/08/29 Göteborg
Body for exhaust emission assessment:
TÜV SÜD Product Service Gmbh
Ridlerstrasse 65
80339 München
Germany
ID Number: 0123
Description of engine(s) and essential requirements
Engine Type ................................................................... 4 stroke diesel engine
Engine model(s) covered by this declaration EC Type certificate number
D1-13 ................................................................................. SB5 08 07 66019 005
D1-20 ................................................................................. SB5 08 07 66019 005
D1-30 ................................................................................. SB5 08 07 66019 006
D2-40 ................................................................................. SB5 08 07 66019 006
D1, D2
Essential requirements
Annex I.B – Exhaust Emissions
Engine identification
Exhaust emission requirements
Durability
Operator’s manual
EMC Directive
Standards Used
Volvo Penta std
EN ISO 8178
Volvo Penta std
ISO 10240:2004
EN 61000-3-2,
EN 61000-3-3,
CISPR 25
Other normative
document used
Annex 1.B.1
Annex 1.B.2
Annex 1.B.3
Annex 1.B.4
To Next Page
Loading...
