EasyManua.ls Logo

Volvo Penta D2-40 - Freshwater System and Coolant

Volvo Penta D2-40
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fuel System
Only use the grades of fuel recommended in the fuel
specification, see Technical Data, page 81. Always
observe the greatest cleanliness during re-fuelling and
work on the fuel system.
All work on the unit injectors of the engine must be
carried out by an authorized workshop.
WARNING!
Fire hazard. When carrying out work on the fuel system
make sure the engine is cold. A fuel spill onto a hot
surface or an electrical component can cause a fire.
Store fuel soaked rags so that they cannot cause fire.
Engine Fuel Filter Replacement
1 Clean the filter bracket.
Avoid fuel spills by placing a plastic bag around the
filter
2 Unscrew the filter
3 Apply a film of oil on the new filter gasket.
4 Screw the filter on by hand until it touches the
contact surface. Then tighten an extra half turn, no
more!
5 Purge the fuel system, refer to the Fuel system,
bleeding, page 57 section.
6 Start the engine and check for leaks.
7 Hand in the old filter to a re-cycling station.
P0003731
Maintenance
56 47711262 01-2019 © AB VOLVO PENTA

Table of Contents

Other manuals for Volvo Penta D2-40

Related product manuals