EasyManua.ls Logo

Volvo Penta D3 - Engine Starting Procedures

Volvo Penta D3
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Starting the Engine
Shifting and adjusting speed is only possible at an
active station. The main station is automatically acti-
vated when the EVC-system is unlocked with the e-
Key panel and the ignition is switched on.
On a boat with two or more stations the engine(s) can
be started from another station with a start/stop panel
– if the engine(s) are turned off. The station automati-
cally becomes active when the engine(s) is/are started.
Make sure the ignition is on
A green light in the IGNITION button indicates to igni-
tion is on.
The ignition is switched on via the e-Key panel. Press
the IGNITION button to switch the ignition on.
Put the gear in neutral
Put the drive/reverse gear in neutral by moving the
control lever(s) to neutral at all stations.
IGNITION
IGNITION
START/STOP
START/STOP
P0016670
Starting
47705992 05-2015 © AB VOLVO PENTA 53

Related product manuals