Engine View
Information
concerning
the engine and its transmission
is shown in Engine View. The information is shown in
two windows; switch between the windows by pressing
the arrow buttons.
Up to six different pieces of operations data can be
shown on the display. The information shown can be
set under Change gauge.
Depending on the functions installed in the boat, the
following can be displayed:
Engine speed
Engine hours
Engine Coolant Temperature
Battery Voltage
Engine oil pressure
Turbo pressure
Exhaust Temperature
Transmission Oil Pressure
Transmission oil temperature
Propeller Rotation
Ahead speed
Power Trim angle
Engine View
Instruments and Controls
18 47702599 12-2011
47702599 - Downloaded from www.volvopenta.com 23/11/2015 22:01:35
To Next Page
Loading...
