Oil Strainer, Cleaning
WARNING!
Working with or approaching a running engine is a
safety risk. Watch out for rotating components and hot
surfaces.
1 Remove the lid/plug and carefully remove the
strainer from the housing (4).
IMPORTANT!
Cleanliness! Dirt must not be allowed to get into
the reverse gear.
2 Clean the strainer and other components in paraffin
(kerosene).
3 Carefully put the components back again.
4 Tighten the plug/screw.
5 Start the engine and check carefully that no leakage
occurs.
1
1
ZF45
ZF220, ZF280
P0003683
Maintenance
64 47713336 03-2021 © AB VOLVO PENTA
To Next Page
Loading...
