Drive Belt, Check and Change
WARNING!
Stop the engine before doing any maintenance work.
Check belt tension and condition regularly. The drive
belt has an automatic tensioner and need not be
adjusted. Check that the belt tensioner does not bot-
tom.
IMPORTANT!
Always change a belt which looks worn or cracked.
Changing the alternator belt
1
Remove the protective cover over the drive belt.
2
Put a socket wrench in the tensioning roller square
fitting. Turn the tensioning roller aside and secure
it by inserting a screwdriver or similar into the space
which opens up.
3 Remove the drive belt.
4 Install the new drive belt and release the locking of
the belt tensioner. Make sure the drive belt fits
properly into the grooves.
5 Fit the protective cover over the drive belt.
Maintenance
76 47702095 04-2011
To Next Page