Regeneration
Parked regeneration
1 Select menu options as below.
2 Await ongoing data transfer.
Driver information display
Regeneration
Parked regeneration
Start now?
Parked regeneration can take from 45 to
120 min or more to perform. It depends
on soot or sulphur level and other engine
conditions.
If parked regeneration is not possible,
check that all criteria are met, see
page 134.
Criteria
Certain criteria must be met for a
regeneration to be possible.
To check regeneration criteria, select the
menu options as below.
Driver information display
Regeneration
Criteria
Criteria:
• Released clutch pedal (manual
gearbox)
• Warmed-up engine
• Released accelerator pedal
• Gear position N
• Stationary vehicle
• Applied parking brake
• Status system (no fault codes in
regeneration related system)
• Soot level below maximum limit value
• Soot level above minimum limit value
• Regeneration enabled
• Kneeling reset (not lowered)
Status
OK All criteria are met.
NOK Criteria have to be resolved in
order to perform regeneration.
NA Not applicable.
Error System fault, check fault codes and
solve the problem in order to
perform regeneration.
Soot level
To check the soot level, select menu
options as below.
Driver information display
Regeneration
Soot level
A graph shows the level of soot in the
filter.
08
Fuel and emission control
134