Doors and hatches
Doors
Entering the bus
Before entering the bus, turn on the
power supply in the battery
compartment.
Turn the switch 90° clockwise.
Turn the key in the lock and turn the
knob to the vertical position. Push the
pneumatic door opening button(s)
located inside the door handle.
NOTE
In case of total or partial loss of air
pressure in the doors, pull the door handle
to open the door.
Keys
The following keys are generally
delivered with the bus:
1 Starter key
2 Exterior and interior hatches and
doors
3 Square key for the service hatch
There may be alternative versions of the
keys, depending on the type of locks that
are fitted.
NOTE
Note the number on the starter key to
facilitate ordering of spare keys.
02
Starting and driving
14