Volvo B 21 - Connecting Rod Cap Installation

Group 21 Reconditioning engine
Assembly
1981- 1984
- 19flO
l
137 \>63
34
D8
Install connecting rod cap
Check identification mark on connecting rod and cap.
Oil studs and use new nuts.
Torque
to :
Old studs ......... .
Newstuds ..
Install remaining pistans
.. . . 63 Nm (46 tUbs)
70 Nm (51 ft.lbs)
D9
Check af ter installing each cap that crankshaft can be
turned.
Install intermediate shaft.
Oil bearing and geer.
DIO
Place finger in oil pump opening and guide shaft into
position.
Install oil pump pinian
- 1980 models
Install cover
Use a new O-ring.
1981 - 1984
Install drain tube and oil trap
DII
D12
Press tube in as far as possible and align with opening.
Use a
new oil trap O-ring.
•
•