09 Maintenance and service
Replacing bulbs
09
212
Position/parking lamps
G007392
1. Withdraw the bulb holder using pliers. Do
not pull out the bulb holder by pulling the
electrical cable.
2. Replace the bulb.
3. Press the bulb holder back on. It can only
be refitted in one position.
Direction indicators
G007393
1. Twist the bulb holder anticlockwise and
remove it.
2. To remove the bulb from the bulb holder,
press the bulb in and turn it anticlockwise.
3. Fit a new bulb and refit the bulb holder into
the lamp housing.
Side marker lamps
G007394
1. Twist the bulb holder anticlockwise and
withdraw it. Replace the bulb.
2. Refit the bulb holder. It can only fit in one
position.