- All other persons should keep away from the
machine, ropes, and load.
- The operator should try to remove the machine
from contact by moving it in the reverse
direction from that which caused the contact.
- If the machine cannot be moved away from
contact, the operator should remain inside cab
until the lines have been de-energized.
Overhead railway power lines
Loading and unloading is only permissible between
the boundary signs. The signs may be mounted
directly on the power line or on special posts.
Contact authorised railway personnel to obtain
permission to load or unload.
After any breaks in the work, always contact the
railway personnel again.
98
Operating techniques
Working within dangerous areas
To Next Page
Loading...
