Maintenance service, every 10
hours
Coolant level, checking
The coolant expansion tank (1) is located under the
rear hood.
1 Shut down the engine.
2 Allow the engine to cool.
Once the cooling system has cooled down, the
coolant level must be between the FULL (MAX) and
LOW (MIN) marks in the coolant expansion tank (1).
If the coolant level is near the LOW (MIN), top up
with coolant.
Coolant level, topping up
NOTICE
In order to avoid damage to engine and cooling
system, different brands of coolant or corrosion
protection must not be mixed.
1 Remove the cap from the expansion tank (1).
2 Top up coolant.
3 Reinstall the cap on the expansion tank.
If the warning of high coolant temperature is shown
on the display unit stop the engine immediately.
Check the coolant level and top up as explained if
necessary.
To Next Page
Loading...
