When required Page
Fuel, filling
166
Batteries, charging
167
Alternator
169
Welding. Any unauthorized welding leads to a loss of warranty.
169
Cleaning machine
169
Paint finish maintenance
171
Touch-up painting
171
Cleaning engine compartment
172
Washer reservoir
172
Front windscreen rail, lubricate
173
Bucket teeth, replacing
173
Seat belt, replace (minimum every third year or latest after 1500 hours) Workshop
job
(1)
DAILY (every 10 hours) Page
General inspection (machine, leakages, connections, function of control
elements, lights, loose or lost of bolts)
Test-run and check
(start, stop, instruments, warning lamps, lights, wiper, washer, horn,
decals, reflectors, back-up/travel alarm, heater and so on)
(check end-position dampening, cylinder at boom)
Machine, visual check (for leakages, loose connections, external
damages, cracks and wear damages)
Fan belt, visual check (for cracks and interferences)
Engine oil level, check
158
Coolant level, check
157
Water separator, check and drain if necessary
159
Hydraulic oil level, check
157
EVERY 50 hours
After carrying out daily service
Page
Lubrication according to Lubrication chart see
Lubrication
chart and
page
160
Hydraulic oil filter, replace (once after the first 50 hours, then every 500
hours)
workshop
job
(1)
1. Contact a qualified service technician.
Maintenance
Lubrication and service chart
153
To Next Page
Loading...
