Operator’s seat, option variant B
Horizontal adjustment
1 Pull lever (1) slightly up.
2 Adjust the seat to the desired position.
3 Check that the seat has properly engaged.
Backrest adjustment
Turn the knob (2) to the desired setting.
Weight adjustment
Pull lever (3) upwards or downwards until the
desired weight adjustment is reached.
Operator’s seat, option variant C
Horizontal adjustment
1 Pull lever (4) slightly up.
2 Adjust the seat to the desired position.
3 Check that the seat has properly engaged.
Backrest adjustment
1 Pull up lever (6).
2 Adjust the inclination of the backrest. Release
the lever to lock the backrest.
3 Check that the backrest has properly engaged.
Weight adjustment
The weight is adjusted with the operator sitting in
the seat.
1 Pull lever (5) fully out, stay in this position and
move lever upwards or downwards until the
desired weight adjustment is reached.
When the minimum/maximum has been
reached you can notice an empty movement in
the lever.
2 The weight has been set correctly when the
arrow is in the middle of the viewing window.
3 Lock the lever again.
To Next Page
Loading...
