3 Position dipper arm, boom and blade as shown
in the illustration.
4 Close and lock windows, doors and hoods
securely.
5 Shut off the engine and put the control lockout
lever fully in the upper end position.
6 Make sure that nobody is in the machine while
lifting.
7 Use suitable lifting equipment to lift the machine.
Make sure that the lifting chains are strong
enough for the weight of the machine. For
machine weight, see page
199
.
NOTE!
Beware of interference between tying material (e.g.
chains) and machine parts. Volvo is not responsible
neither for lifting equipment nor for lifting
techniques.
8 The distance (C) between axis A (lifting points
on boom) and B (lifting points on blade) and
distance (D, lifting points on blade) must be
observed when lifting.
mm (in) blade C D
EC15E
1633
(64.29)
930
(36.61)
EC18E
short
1683
(66.26)
long
1863
(73.35)
ECR18E
short
1803 mm
(70.98)
long
1983
(78.07)
EC20E
1753
(69.02)
9 Maintain good visibility of the machine at all
times during the lift.
To Next Page
Loading...
