Electrical distribution box
NOTICE
Never install a fuse with a higher amperage than
what is stated on the decal. Risk of damage or fire
on the circuit board.
Fuses are equipped to protect the electric system
from an electrical overload.
A decal which shows the exact positions and
specifications of respective relays and fuses is
provided on the inside of cover, see page
312
.
NOTE!
If a fuse blows repeatedly in the same position, the
cause of the fault has to be investigated.
1 Loosen screws (A) and remove cover of the fuse
box (B).
2 Remove the burnt fuse using a fuse holder tool.
3 Install a new fuse with same capacity as the old
one.
Safety when servicing
Before service, read
235
To Next Page
Loading...
