Volvo EC60E - Page 300

System Oil grade Recommended viscosity at varying ambient
temperature
Hydraulic
system
Volvo Extra hydraulic oil
°C
°F
-30
-22
-10
-14
0
+32
+10
+50
+20
+68
+30
+86
+40
+104
+50
+122
-20
-4
ISO VG32 HV
ISO VG46 HV
ISO VG68 HV
Volvo Biodegradable
hydraulic oil (based on
synthetic ester)***
°C
°F
-30
-22
-10
-14
0
+32
+10
+50
+20
+68
+30
+86
+40
+104
+50
+122
-20
-4
Bio oil VG46
Volvo Ultra hydraulic oil
(Long life hydraulic oil)
°C
°F
-30
-22
-10
-14
0
+32
+10
+50
+20
+68
+30
+86
+40
+104
+50
+122
-20
-4
ISO VG46
Pin and
bushing
Grease (Multi purpose
EP** grease NLGI 2)
°C
°F
-30
-22
-10
-14
0
+32
+10
+50
+20
+68
+30
+86
+40
+104
+50
+122
-20
-4
*ISO-L-XBCFB2
Fuel Diesel fuel
°C
°F
-30
-22
-10
-14
0
+32
+10
+50
+20
+68
+30
+86
+40
+104
+50
+122
-20
-4
*ASTM D975 No.2
ASTM D975 No.1
Cooling
system
Volvo Coolant VCS Volvo Coolant VCS should be used only, see
page
301 .
Air
conditioner
system
Refrigerant HFC R134a
*: Installed at factory
**: Extreme Pressure
***: If the machine is filled with Volvo Biodegradable hydraulic oil this oil must also be used
when filing and changing. The mineral oil content in bio oil should not exceed 2% when
changing from mineral oil to bio oil. Contact a workshop authorised by Volvo.
NOTE!
The fuel should at least meet the legal requirement, and national and international
standards for marketed fuels, for example : EN590 (with nationally adapted temperature
requirements), ASTM D975 No 1-D and No 2-D, JIS KK 2204.
NOTE!
The content of Volvo coolant must not be less than 40% of the total mixture.
Specifications
Recommended lubricants 299