6 Setup
There are sub-items, "Boom-swing”,
“X1”, ”Dozer blade”, “X3”, ” Wiper interval”, “Auto
idle time”, ”Auto shutdown”, “Anti-theft system”,
“Overload pressure”, “Operating pattern,
“Language”, “Units”, “Time/date”, “Display
backlight”, and “Keypad backlight” and “Camera
position”.
Boom-swing
This is to preset boom-swing speed and
response mode. Operator can adjust left and
right boom-swing speed separately.
LH speed and RH speed will be shown on I-
ECU when boom-swing function is selected.
For more information regarding boom swing ,
see page
38
for flow display and see page
86
,
100
for operating.
LH speed : This is to preset left boom swing
speed.
RH speed : This is to preset right boom swing
speed.
Response mode: The operator can adjust the
movement sensitivity of “Boom-swing” when
operating the levers. "Active" mode is the
most sensitive.
- Active
- Normal
- Soft
V1158209
Setup
Boom-swing
Boom-swing
LH speed
MaxMin
RH speed
MaxMin
V1158210
Active
Boom-swing
Response mode
Set response
Active
Normal
Soft
56
Instrument panels
Display unit
To Next Page
Loading...
