No coverage
- If the WECU has not been connected to the
CareTrack portal for the number of days set by
Volvo's service tool, the machine will be
immobilized.
- The no coverage days warning will appear at
every start with number of remaining days set by
Volvo's service tool.
- The active trigger and no coverage counter can
be reset using a one-time code or Volvo's service
tool.
- If the machine gets a connection to the CareTrack
portal, the machine will be mobilized (de-
immobilized) and the coverage counter is reset.
ECU tampered
- When the machine is turned on, the WECU and
V-ECU check the machine serial number of the
other ECUs. If the machine's serial number is
different, the V-ECU prevents machine start
immediately and a warning message will appear
on the I-ECU.
- If the WECU is disconnected from key on cable
and the machine is turned on, the V-ECU
prevents machine start immediately and a
warning message will appear on the I-ECU.
- The warning condition is revoked when the trigger
has disappeared.
V1139554
No coverage
Days before immob: XXX
V1137942
No coverage
Immobilization at next stop
V1160926
Electronic system tampered
Contact service
Machine inoperable
V1155510
Anti-Theft system tampered
Machine immobilized
Contact service
80
Instrument panels
Display unit
To Next Page
Loading...
