17) Overload warning button
Overload warning button activates or deactivates
"Overload warning" function. This button is to
display a symbol and to generate an alarm if the
"overload signal" is detected.
- First event of overloading: The pop-up message
will be displayed and a warning alarm sounds.
The warning indicator is also shown on indicator
screen. The pop-up message will disappear only
when the ESC button is pressed.
- When the event occurs again when operating the
machine: A warning alarm sounds and the
indicator is shown. When reducing the load, the
alarm and indicator will turn off.
18) Washer button
This button is to work washer.
19) X3 / dozer blade activating button
This button is used to activate the X3 / dozer blade
function.
NOTE!
This instruction can be changed according to the
types of operating lever. For more information about
operating levers, see page
100
.
NOTE!
Select the X3 work tool on the I-ECU, see page
45
for details.
20) X1 / boom swing activating button
See page
100
.
Instrument panels
Instrument panel, right
93
To Next Page
Loading...
