M
Measures before operating
NOTE!
The safety regulations and operating instructions issued by the
manufacturer of the machine and attachments must strictly be
observed.
1 Read the Operator“s manual.
2 Carry out daily service, see page
268
.
In cold weather, make sure that the freezing point of the
coolant is sufficiently low and that the lubricating oil and fuel
is intended for winter use.
3 Make sure the fire extinguisher (if equipped) is fully charged.
4 Check that hoods and covers are closed.
5 Check that the battery disconnect switch is switched on.
6 Check the IC (Instrument Cluster) for failure messages.
7 Adjust the steering wheel and the operator seat, see pages
91
and
112
.
8 Fasten the seat belt.
9 Check that there are no persons in the work area of the
machine.
10 Check that the attachment is securely locked before use.
1
5
2
p
e
r
a
t
i
n
g
n
s
r
u
c
i
o
n
s
e
a
s
r
e
s
e
f
o
r
e
p
e
r
a
t
i
n
g