Controls
64 Hydraulic controls
Hydraulic controls
11
Hydraulic controls
1 and 6
Left-hand and right-hand blade lift
n Push forward on both levers at the same time to lower the
moldboard.
n Pull back on both levers at the same time to raise the mold-
board.
1 Left-hand blade lift lever 6 Right-hand blade lift lever
2 Moldboard slide shift lever 7 Control lever for scarifier, ripper or windrow eliminator
3 Circle turn lever 8 Articulation lever
4 Circle shift lever 9 Moldboard tilt lever
5 Front wheel lean lever 10 A-frame attachments lever
To Next Page
