AUDIO AND MEDIA
56
Changing to another Bluetooth
®
device
It is possible to change from a connected device
to another one if there are several devices in the
car. The device must first have been registered
(p. 54) to the car.
Changing media device
1. Check that the external device has
Bluetooth
®
activated, see the external devi-
ce's manual.
2.
In the normal view for the Bluetooth
®
media
source, press OK/MENU and select
Change device.
> The car searches for previously connected
devices. The external devices detected are
specified with their respective Bluetooth
®
name in the display screen.
3. Select the device to be connected.
> Connection of the external device takes
place.
Changing phone
1. Check that the external device has
Bluetooth
®
activated, see the external devi-
ce's manual.
2. In the normal view for the phone source,
press OK/MENU and select
Change
phone.
> The car searches for previously connected
devices. The external devices detected are
specified with their respective Bluetooth
®
name in the display screen.
3. Select the device to be connected.
> Connection of the external device takes
place.
Related information
•
Audio and media - operating the system
(p. 28)
•
Connecting and disconnecting a Bluetooth
®
device (p. 53)
Disconnecting the Bluetooth
®
device
When the Bluetooth
®
device is out of range of
the car it is automatically disconnected.
When the mobile phone has been disconnected
an ongoing call can continue by using the mobile
phone's built-in microphone and speaker.
The handsfree function is deactivated when the
engine is switched off and the door is opened
21
.
To deregister a Bluetooth
®
device from the car,
see Removing a Bluetooth
®
device (p. 57). The
car will then not search for the device automati-
cally.
Related information
•
Audio and media - operating the system
(p. 28)
•
Connecting and disconnecting a Bluetooth
®
device (p. 53)
•
Media Bluetooth
®
(p. 53)
•
Bluetooth
®
handsfree phone (p. 57)
21
Only Keyless Drive.
To Next Page
Loading...