||
CLIMATE CONTROL
* Option/accessory, for more information, see Introduction.
140
4.
If
Indoor parking is selected then the sym-
bol for this (p. 139) is shown instead. Scroll
with the thumbwheel to the symbol and
select with OK.
5.
Scroll forward in the next menu to
Outdoor
parking and select with OK.
6.
Go back in the menu with RESET.
7. Select whether or not seat heating and
steering wheel heating
6
should be activated.
Scroll with the thumbwheel to
and
select with OK.
8.
Scroll with the thumbwheel to
Driver seat or
Passenger seat and select with the OK
button if they should be activated
6
during
preconditioning.
9.
Exit the menu with RESET.
Related information
•
Preconditioning - direct start (p. 140)
•
Preconditioning - immediate stop (p. 141)
Preconditioning - direct start
Preconditioning of the car can be started
directly.
Direct start can be performed via:
•
information display
•
remote control key*
•
mobile*.
NOTE
In the event of direct start of preconditioning,
Volvo recommends that you activate via the
remote control key or mobile.
Direct start via the information display
1.
Press OK to access the menu.
2. Scroll with the thumbwheel to
Preconditioning and select with OK.
3.
Scroll forward in the next menu to
Direct
start in order to activate the preconditioning
and select with OK.
4.
Exit the menu with RESET.
Direct start via the remote control key*
Indicator lamp on remote control key with PCC*.
6
Seat heating and steering wheel heating can only be activated when the car is plugged into the mains power circuit.
To Next Page