CLIMATE CONTROL
142
Preconditioning - timer
Preconditioning (p. 138) timer is connected to
the car's clock.
The time when the car shall be used and accli-
matised is specified with the timer.
Two different times can be selected using the
timer (p. 142). The car's electronics select when
preconditioning shall be activated based on pre-
vailing external climatic conditions.
NOTE
All timer programming will be cleared if the
car's clock is reset.
Related information
•
Timer - starting (p. 143)
•
Timer - switching off (p. 143)
Timer - setting
Two different times can be selected using the
timer. Here time refers to the time when the car
shall be used and acclimatised.
NOTE
All timer programming will be cleared if the
car's clock is reset.
1.
Press OK to access the menu.
2. Scroll with the thumbwheel (p. 112) to
Preconditioning and select with OK.
3. Select one of the two timers using the
thumbwheel and confirm with OK.
4.
Briefly press OK to move to the illuminated
hours setting.
5. Select the required hour using the thumb-
wheel.
6.
Briefly press OK to move to the illuminated
minutes setting.
7. Select the required minute using the thumb-
wheel.
8.
Press OK
7
to confirm the setting.
9.
Go back in the menu structure with RESET.
10. Select the second timer (continued from
point 2) or exit the menu with RESET.
Related information
•
Preconditioning - timer (p. 142)
•
Timer - starting (p. 143)
•
Timer - switching off (p. 143)
7
An further press of OK activates the timer.
To Next Page
Loading...
