DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction.
241
BLIS* - operation
BLIS (Blind Spot Information) is a function
designed for providing support for the driver
when driving in dense traffic on roads with sev-
eral lanes in the same direction.
Activate/deactivate BLIS
BLIS is activated when the engine is started. This
is confirmed by the indicator lamps in the door
panels flashing once.
The BLIS function can be deactivated/activated
the car's menu system MY CAR (p. 115).
When BLIS is deactivated/activated the lamp in
the button extinguishes/illuminates and the com-
bined instrument panel confirms the change with
a text message. The door panel indicator lamps
flash once upon activation.
To extinguish the message:
•
Press the left stalk switch OK button.
or
•
Wait approx. 5 seconds - the message extin-
guishes.
Activate/deactivate BLIS
BLIS is activated when the engine is started. This
is confirmed by the indicator lamps in the door
panels flashing once.
Button for activating/deactivating.
The BLIS function can be deactivated/activated
by pressing the BLIS button on the centre con-
sole.
Some combinations of the selected equipment
leave no vacant space for a button in the centre
console - in which case the function is handled
by the car's menu system MY CAR (p. 115).
When BLIS is deactivated/activated the lamp in
the button extinguishes/illuminates and the com-
bined instrument panel confirms the change with
a text message. The door panel indicator lamps
flash once upon activation.
To extinguish the message:
•
Press the left stalk switch OK button.
or
•
Wait approx. 5 seconds - the message extin-
guishes.
When BLIS operates
Principle for BLIS: 1. Zone in blind spot. 2. Zone for rap-
idly approaching vehicle.
The BLIS function is active at speeds above
10 km/h (6 mph).
The system is designed to react when:
•
the driver's vehicle is overtaken by other
vehicles
•
the driver's vehicle is rapidly caught up by
another vehicle.
When BLIS detects a vehicle in zone 1 or a
quickly approaching vehicle in zone 2, the door
panel BLIS lamp illuminates with a constant glow.
If the driver activates the direction indicator on
the same side as the warning in this situation
then the BLIS lamp will change from a constant
glow to flashing with a more intense light.
To Next Page
Loading...
