WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
165
Angling the door mirrors
To ensure better visibility to the rear, the door
mirrors need to be set to the preferences of the
driver. There are a number of automatic settings
that can also be linked to the memory function
buttons for the power seat*.
Using controls for door mirrors
Controls for door mirrors.
The door mirror positions are adjusted with the
joystick in the driver's door control panel. Ignition
position must be at least I.
1.
Press the L button for the left-hand door mir-
ror or the R button for the right-hand door
mirror. The light in the button illuminates.
2. Adjust the position with the joystick in the
centre.
3.
Press the L or R button again. The light
should no longer be illuminated.
Folding in rearview mirrors electrically*
The mirrors can be retracted for parking/driving
in narrow spaces.
1.
Depress the L and R buttons simultaneously.
2. Release them after approximately 1 second.
The mirrors automatically stop in the fully
retracted position.
Fold out the mirrors by pressing down the L and
R buttons simultaneously. The mirrors automati-
cally stop in the fully extended position.
Resetting to neutral
Mirrors that have been moved out of position by
an external force must be reset electrically to the
neutral position for electric retracting/extending*
to work correctly.
1. Fold in the door mirrors by pressing down
the L and R buttons simultaneously.
2.
Fold them out again by pressing the L and R
buttons simultaneously.
3. Repeat the above procedure as necessary.
The mirrors are now reset in neutral position.
Angling during parking
3
A door mirror can be angled down for the driver
to view the side of the road when parking, for
example.
–
Engage reverse gear and press the L or R
button.
Note that the button may need to be pressed
twice, depending on whether it was already pre-
selected. The button flashes when the door mir-
ror is angled down. When reverse gear is disen-
gaged, the door mirror automatically starts to
return after approx. 3 seconds and then reaches
its original position after approx. 8 seconds.
Automatic angling during parking
3
With this setting, the door mirror is automatically
angled down when reverse gear is selected. The
folded position is preset and cannot be adjusted.
You can make the door mirror return to its origi-
nal position by pressing the L or R button twice.
1.
Tap on
Settings in the centre display's top
view.
2. Press
My Car Mirrors and Convenience.
3.
Under
Exterior Mirror Tilt at Reverse,
select Off, Driver, Passenger or Both to
activate/deactivate and to select which
review mirror should be angled.
3
Only in combination with power seat with memory buttons*.
To Next Page
