||
HYBRID INFORMATION
440
Related information
•
Charging the hybrid battery (p. 429)
•
The charging cable's control unit (p. 435)
•
Opening and closing the hatch for the charg-
ing input socket (p. 437)
•
Charging status in the car's charging input
socket (p. 440)
•
Charging status in the car's driver display
(p. 447)
•
Charging status in the charging cable's con-
trol unit (p. 441)
•
Stop charging of hybrid battery (p. 449)
Charging status in the car's
charging input socket
The charging input socket shows the charging
status using an LED lamp.
LED lamp location in the car's charging input socket.
The LED lamp shows the existing status while
charging is in progress. If the LED lamp does not
illuminate, check that the cable is firmly plugged
into the wall socket and the socket in the car.
The white, red or yellow lamps are activated when
the passenger compartment lighting is switched
on - they remain switched on for a while after the
passenger compartment lighting has been
switched off.
LED lamp's
glow
Specification
White LED light.
Yellow
Waiting mode
A
- waiting for
charging to start.
Flashing green
Charging in progress
B
.
Green
Charging complete
C
.
Red A fault has arisen.
A
For example, after a door has been opened or if the charging
cable's handle is not locked in.
B
The slower the flashing, the closer to fully charged.
C
Extinguishes after a while.
Related information
•
Charging the hybrid battery (p. 429)
•
Charging status in the car's driver display
(p. 447)
•
Charging status in the charging cable's con-
trol unit (p. 441)
•
Stop charging of hybrid battery (p. 449)
To Next Page
