DISPLAYS AND VOICE CONTROL
88
Settings for trip statistics
Reset or adjust settings for trip statistics.
1.
Open the
Driver performance app in app
view in order to show the trip statistics.
2.
Press
Preferences to
•
change graph scale. Select resolution 1,
10 or 100 km/miles for the bar.
•
reset data after every trip. Performed
when the car has been stationary for more
than 4 hours.
•
reset data for the current trip.
Trip statistics, calculated average consump-
tion and total driving time are always reset
simultaneously.
Units for distance, speed, etc. can be changed via
system settings in the centre display.
Related information
•
Show trip statistics in the centre display
(p. 87)
•
Trip computer (p. 84)
•
Resetting the trip meter (p. 87)
Time and date
The clock is shown in both the driver display and
the centre display.
Clock location
Clock location in the 12-inch and 8-inch driver display.
In the centre display, the clock is located at the
top right of the status bar.
In certain situations, messages and information
may cover the clock in the driver display.
Settings for time and date
–
Select Settings System Date and
Time
in the centre display's top view to
change settings for time and date format.
Adjust time and date by pressing the up or
down arrow on the touch screen.
Automatic time for cars with GPS
When the car is equipped with a navigation sys-
tem,
Auto Time can be selected. The time zone
is then adjusted automatically based on the loca-
tion of the car. For certain types of navigation
systems, the current location (country) must also
be set to obtain the right time zone. If Auto Time
is not selected, time and data are adjusted with
arrow up or arrow down on the touch screen.
Summer time
In certain countries, it is possible to select auto-
matic setting of summer time with
Auto. For
other countries, summer time can be set with On
or Off.
Related information
•
Driver display (p. 79)
•
Other settings in the centre display's top
view (p. 126)
To Next Page
Loading...
