||
DRIVER SUPPORT
360
Limitations for City Safety when evasive
manoeuvres are prevented
NOTE
The function uses the car's combined Camera
and Radar unit, which has certain general lim-
itations – see the sections "Limitations for
Camera Unit" and "Limitations for Radar Unit"
respectively.
Related information
•
City Safety™ (p. 351)
•
Limitations for camera unit (p. 348)
•
Limitations for radar device (p. 339)
City Safety brakes for oncoming
vehicles
City Safety can assist the driver to use emer-
gency braking for an oncoming vehicle in your
car's lane.
If an oncoming vehicle enters your car's lane and
a collision is unavoidable, City Safety can reduce
the car's speed with a view to reducing the vio-
lence of the impact.
Your car
Oncoming vehicles
For this function to work, the following criteria
must be met:
•
your car must be travelling at more than
4 km/h (3 mph)
•
the road section must be straight
•
your car's lane must have clear lane mark-
ings
•
your car must be positioned straight in its
own lane
•
the oncoming vehicle must be within your
car's lane markings
•
the oncoming vehicle must have its head-
lamps switched on
•
this function can only handle "front to front"
collisions
•
this function can only detect vehicles with
four wheels
•
this function requires working Electric seat-
belt pretensioners (see section "Seatbelt
pretensioner").
NOTE
The function uses the car's combined Camera
and Radar unit, which has certain general lim-
itations – see the sections "Limitations for
Camera Unit" and "Limitations for Radar Unit"
respectively.
To Next Page
